Spain Big Band Arrangement Pdf Free [WORK]
Download File https://shoxet.com/2tdiEi
IF THE OPERATOR BASE SETTING IS TRUE, E1, E2, or E3 can beconfigured separately, in which case only the appropriate basebandoutput level is allowed when thereported VOX pin is set to HIGH. For example, suppose the basebandcompressor circuit is set to E-2. If E1 is the basebandcompressor setting, the radio will allow the operator to setE1 for +3 dB when the operator sets E2 to +3 dB, but it will notallow the operator to set E2 for +3 dB when E1 is set to +3 dB.
The service manual does not cover the operation of the IF selector switch(If switch) or the IF selector switch spring (IF spring). Please referto the manual of the IF switch immediately. The IF switch andIF spring may be located as follows (Refer to Figure 4.2):
The IF switch and IF switch spring (If switch spring) are springloaded; they may not be easily pushed or pulled back and forth.For normal operation it is sufficient to push them forward and pullthem back. If a spring becomes damaged due to tampering orotherwise, it must be replaced or repaired. If the switch does notoperate normally, the IF switch may be located as follows (Refer toFigure 4.3): d2c66b5586